Photo-DSC and dynamic mechanical studies on UV curable compositions containing diacrylate of ricinoleic acid amide derived from castor oilPALANISAMY, Aruna; RAO, B. S.Progress in organic coatings. 2007, Vol 60, Num 3, pp 161-169, issn 0300-9440, 9 p.Article

Crystal chemistry and properties of mullite-type Bi₂M₄O₉: An overviewSCHNEIDER, Hartmut; FISCHER, Reinhard X; GESING, Thorsten M et al.International journal of materials research. 2012, Vol 103, Num 4, pp 422-429, issn 1862-5282, 8 p.Conference Paper

A study on the deflection of shape memory alloy (SMA) reinforced thermo-viscoelastic beamDU, X. W; SUN, G; SUN, S. S et al.Composites science and technology. 2004, Vol 64, Num 9, pp 1375-1381, issn 0266-3538, 7 p.Article

Three-dimensional stress analysis of cracked satin woven carbon fiber reinforced/polymer composites under tension at cryogenic temperaturesTAKEDA, Tomo; SHINDO, Yasuhide; WATANABE, Shinya et al.Cryogenics (Guildford). 2012, Vol 52, Num 12, pp 784-792, issn 0011-2275, 9 p.Article

Localized Deformation due to Portevin-LeChatelier Effect in 18Mn-0.6C TWIP Austenitic SteelCHEN, Lei; KIM, Han-Soo; KIM, Sung-Kyu et al.ISIJ international. 2007, Vol 47, Num 12, pp 1804-1812, issn 0915-1559, 9 p.Article

Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosetsGUIGO, Nathanael; MIJA, Alice; VINCENT, Luc et al.European polymer journal. 2010, Vol 46, Num 5, pp 1016-1023, issn 0014-3057, 8 p.Article

Damage mechanisms induced by cyclic ply-stresses in carbon-epoxy laminates : Environmental effectsLAFARIE-FRENOT, M. C.International journal of fatigue. 2006, Vol 28, Num 10, pp 1202-1216, issn 0142-1123, 15 p.Conference Paper

Production and characterization of polyhydroxyalkanoates by recombinant Methylobacterium extorquens: Combining desirable thermal properties with functionalityHÖFERA, Philipp; VERMETTE, Patrick; GROLEAUA, Denis et al.Biochemical engineering journal. 2011, Vol 54, Num 1, pp 26-33, issn 1369-703X, 8 p.Article

Thermo-mechanical behavior of electrospun thermoplastic polyurethane nanofibersALHAZOV, Dmitriy; GRADYS, Arkadiusz; SAJKIEWICZ, Pawel et al.European polymer journal. 2013, Vol 49, Num 12, pp 3851-3856, issn 0014-3057, 6 p.Article

Dough thermo-mechanical properties: influence of sodium chloride, mixing time and equipmentANGIOLONI, A; DALLA ROSA, M.Journal of cereal science (Print). 2005, Vol 41, Num 3, pp 327-331, issn 0733-5210, 5 p.Article

Synthesis, thermal and mechanical properties of modified PMR/carbon fiber compositesSELLADURAI, Madhiyan; SUNDARARAJAN, Pudupadi R; SAROJADEVI, Muthusamy et al.Chemical engineering journal (1996). 2012, Vol 203, pp 333-347, issn 1385-8947, 15 p.Article

Poly(lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II)CHANG, Jin-Hae; YEONG UK AN; CHO, Donghwan et al.Polymer (Guildford). 2003, Vol 44, Num 13, pp 3715-3720, issn 0032-3861, 6 p.Article

Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particlesHUBER, T; DEGISCHER, H. P; LEFRANC, G et al.Composites science and technology. 2006, Vol 66, Num 13, pp 2206-2217, issn 0266-3538, 12 p.Article

Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modelingMÜLLER, Werner W; PRETSCH, Thorsten.European polymer journal. 2010, Vol 46, Num 8, pp 1745-1758, issn 0014-3057, 14 p.Article

Molecular dynamics study on thermo-mechanical properties of bismuth telluride bulkYU TONG; FAJUN YI; LISHENG LIU et al.Computational materials science. 2010, Vol 48, Num 2, pp 343-348, issn 0927-0256, 6 p.Article

Effect of alkali metal oxides R₂O (R = Li, Na, K, Rb and Cs) and network intermediate MO (M = Zn, Mg, Ba and Pb) in tellurite glassesDESIRENA, H; SCHÜLZGEN, A; SABET, S et al.Optical materials (Amsterdam). 2009, Vol 31, Num 6, pp 784-789, issn 0925-3467, 6 p.Article

Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubesRAHMAN, Muhammad M; HOSUR, Mahesh; LUDWICK, Adriane G et al.Polymer testing. 2012, Vol 31, Num 6, pp 777-784, issn 0142-9418, 8 p.Article

Thermo-mechanical characterization of Cu-Al-Ni shape memory alloys elaborated by powder metallurgyIBARRA, A; SAN JUAN, J; BOCANEGRA, E. H et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2006, Vol 438-40, pp 782-786, issn 0921-5093, 5 p.Conference Paper

Thermo-mechanical properties of ceramics : Resistance to initiation and propagation of crack in high temperatureKALANTAR, M; FANTOZZI, G.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 472, Num 1-2, pp 273-280, issn 0921-5093, 8 p.Article

Property analysis of triglyceride-based thermosetsLA SCALA, John; WOOL, Richard P.Polymer (Guildford). 2005, Vol 46, Num 1, pp 61-69, issn 0032-3861, 9 p.Article

From stress sensor towards back end of line embedded thermo-mechanical sensorARRAZAT, B; ORELLANA, S; RIVERO, C et al.Microelectronic engineering. 2014, Vol 120, pp 41-46, issn 0167-9317, 6 p.Conference Paper

Structure-property relationships in polyamide 12/halloysite nanotube nanocompositesLECOUVET, B; GUTIERREZ, J. G; SCLAVONS, M et al.Polymer degradation and stability. 2011, Vol 96, Num 2, pp 226-235, issn 0141-3910, 10 p.Article

Analysis of sulphone based organic―inorganic hybrid epoxy nanocomposites for advanced engineering applications—Study of the mechanical, thermomechanical, XRD, EDS and physical propertiesSHREE MEENAKSHI, K; SUDHAN, E. Pradeep Jaya; MENON, Prathibha G et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2012, Vol 536, pp 152-158, issn 0921-5093, 7 p.Article

Evaluation of Properties of Concrete Incorporating Fly Ash or Slag Using a Hydration ModelWANG, Xiao-Yong; LEE, Han-Seung.Journal of materials in civil engineering. 2011, Vol 23, Num 7, pp 1113-1123, issn 0899-1561, 11 p.Article

Shape memory poly(ester urethane) with improved hydrolytic stabilityPRETSCH, Thorsten; MÜLLER, Werner W.Polymer degradation and stability. 2010, Vol 95, Num 5, pp 880-888, issn 0141-3910, 9 p.Article